Original file

Nissan X-Trail Bosch EDC17C84 10SW012814

An original (stock) flash read of the Bosch EDC17C84 control unit, fitted in Nissan X-Trail, software number 10SW012814, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Nissan X-Trail1.6 diesel 129PS
Control unit
Bosch EDC17C84
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Software number
10SW012814
Vehicle maker's hardware number
237016FN1D
Software / calibration
r170B_780_

Technical data

Vehicle
BrandNissan
Car modelX-Trail
Engine1.6 diesel 129PS
Power129.0PS / 94.9kW
Control unit
Control unitBosch EDC17C84
ECU makerBosch
Software number10SW012814
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key54d75c13edc7b398
Identification read from the file
ECU nameEDC17C84
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW012814Offset in the file: 0x04001A
Vehicle maker's hardware number237016FN1DOffset in the file: 0x223DF8
Software / calibrationr170B_780_Offset in the file: 0x02013C
Internal build stringCB_015_TC1782_2.9.1Offset in the file: 0x000100
Bosch project identifier (EPK)39/1/EDC17_C84/15/P_1251//r170B_780_///Offset in the file: 0x02013C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C84 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW012814. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Nissan X-TrailFlash2,688.00 KB€15Add to cart
Nissan QashqaiFlash2,560.00 KB€15Add to cart

All reads of 10SW012814

Other pairs of Bosch EDC17C84

HardwareSoftwareVehicles
10SW012235Nissan X-Trail
10SW012657Nissan Qashqai
10SW012658Nissan Qashqai
10SW012772Nissan Qashqai
10SW013253Nissan X-Trail
10SW013447Nissan X-Trail, Nissan X Trail
10SW014336Renault Trafic
10SW014402Nissan Qashqai

Bosch EDC17C84 original files

The Bosch EDC17C84 unit page