Original file
Nissan X-Trail Bosch EDC17C84 10SW022391
An original (stock) flash read of the Bosch EDC17C84 control unit, fitted in Nissan X-Trail, software number 10SW022391, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Nissan X-Trail2.0 177PS
- Control unit
- Bosch EDC17C84
- Read type
- Calibration only (data set)
- File
- 2,560.00 KB · Flash
- Software number
- 10SW022391
- Vehicle maker's hardware number
- 237014BD2D
- Software / calibration
- r170B_A5C_
Technical data
| Brand | Nissan |
|---|---|
| Car model | X-Trail |
| Engine | 2.0 177PS |
| Fuel | Diesel |
| Power | 177.0PS / 130.2kW |
| Control unit | Bosch EDC17C84 |
|---|---|
| ECU maker | Bosch |
| Software number | 10SW022391 |
| File type | Original flash read |
|---|---|
| File size | 2,560.00 KB (2,621,440 bytes) |
| File key | 80ea256e16dfac24 |
| ECU name | EDC17C84 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW022391 | Offset in the file: 0x02001A |
| Vehicle maker's hardware number | 237014BD2D | Offset in the file: 0x2264F2 |
| Software / calibration | r170B_A5C_ | Offset in the file: 0x02013C |
| Bosch project identifier (EPK) | 39/1/EDC17_C84/15/P_1251//r170B_A5C_/// | Offset in the file: 0x02013C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17C84 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number 10SW022391. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other reads of this pair
The same hardware and software numbers, read from other vehicles or at other times; each has its page.
| Vehicles | Size | Price | Add to cart |
|---|---|---|---|
| Nissan X-Trail | 2,560.00 KB | €15 | Add to cart |
| Nissan X-Trail | 2,560.00 KB | €15 | Add to cart |
Other pairs of Bosch EDC17C84
| Hardware | Software | Vehicles |
|---|---|---|
| 10SW021673 | Nissan X-Trail | |
| 10SW022054 | Nissan X-Trail | |
| 10SW022058 | Nissan X-Trail | |
| 10SW022386 | Nissan Micra | |
| 10SW027345 | Nissan NV300 | |
| 10SW027888 | Nissan Qashqai | |
| 10SW027932 | Nissan Qashqai | |
| 10SW032141 | Renault Trafic |