Original file
Opel Vivaro Bosch EDC17C84 10SW043020170C_G40 / MCE3859TGLMRH43141673
An original (stock) flash read of the Bosch EDC17C84 control unit, fitted in Opel Vivaro, hardware number 10SW043020170C_G40 and software number MCE3859TGLMRH43141673, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Opel Vivaro1.6 diesel · 125.0PS / 91.9kW
- Control unit
- Bosch EDC17C84
- Read type
- Full read (boot area included)
- File
- 2,560.00 KB · Flash
- Hardware number
- 10SW043020170C_G40
- Software number
- MCE3859TGLMRH43141673
- Bosch part / software
- 10SW043020
- Software / calibration
- r170C_G40_
Technical data
| Brand | Opel |
|---|---|
| Car model | Vivaro |
| Engine | 1.6 diesel |
| Power | 125.0PS / 91.9kW |
| Control unit | Bosch EDC17C84 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 10SW043020170C_G40 |
| Software number | MCE3859TGLMRH43141673 |
| File type | Original flash read |
|---|---|
| File size | 2,560.00 KB (2,621,440 bytes) |
| File key | e6c3e269427ba900 |
| ECU name | EDC17C84 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1782 | |
| Bosch part / software | 10SW043020 | Offset in the file: 0x04001A |
| Software / calibration | r170C_G40_ | Offset in the file: 0x02013C |
| Internal build string | CB_015_TC1782_2.16.1 | Offset in the file: 0x000100 |
| Bosch project identifier (EPK) | 39/1/EDC17_C84/15/P_1251//r170C_G40_/// | Offset in the file: 0x02013C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17C84 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 10SW043020170C_G40 and software number MCE3859TGLMRH43141673. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17C84
| Hardware | Software | Vehicles |
|---|---|---|
| 10SW0348361251_7M0 | 10SW034836 | Renault Clio |
| 10SW035049170C_250 | 035049 | Renault Clio IV |
| 10SW035051170C_250 | MCE1789TGLMRH85721673 | Renault Clio IV |
| 10SW035863170C_710 | 10SW035863 | Nissan Micra |
| 10SW043733170C_G40 | 10SW043733 | Opel Vivaro |
| 10SW043733170C_G40 | MCE3859TGLMRH43141673 | Fiat Talento |
| 10SW0693991251_660 | 1037552672 | Renault Espace |
| 170B_8E0_ | 10SW011017 | Renault Traffic |