Original file

Renault Traffic Bosch EDC17C84 170B_8E0_ / 10SW011017

An original (stock) flash read of the Bosch EDC17C84 control unit, fitted in Renault Traffic, hardware number 170B_8E0_ and software number 10SW011017, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Traffic1.6 · 145.0PS / 106.6kW
Control unit
Bosch EDC17C84
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Hardware number
170B_8E0_
Software number
10SW011017
Vehicle maker's hardware number
237108353R
Software / calibration
r170B_8E0_

Technical data

Vehicle
BrandRenault
Car modelTraffic
Engine1.6
FuelDiesel
Power145.0PS / 106.6kW
Control unit
Control unitBosch EDC17C84
ECU makerBosch
Hardware number170B_8E0_
Software number10SW011017
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key02c7f44a4d077e53
Identification read from the file
ECU nameEDC17C84
Read typeCalibration only (data set)
Bosch part / software10SW011017Offset in the file: 0x02001A
Vehicle maker's hardware number237108353ROffset in the file: 0x21A486
Software / calibrationr170B_8E0_Offset in the file: 0x02013C
Bosch project identifier (EPK)39/1/EDC17_C84/15/P_1251//r170B_8E0_///Offset in the file: 0x02013C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C84 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 170B_8E0_ and software number 10SW011017. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C84

Bosch EDC17C84 original files

The Bosch EDC17C84 unit page