Original file

Nissan X-Trail Bosch EDC17C84 237014BD1E / 10SW013447

An original (stock) flash read of the Bosch EDC17C84 control unit, fitted in Nissan X-Trail, hardware number 237014BD1E and software number 10SW013447, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Nissan X-Trail2.0 diesel · 177.0PS / 130.2kW
Control unit
Bosch EDC17C84
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
237014BD1E
Software number
10SW013447
Software / calibration
r170B_A50_

Technical data

Vehicle
BrandNissan
Car modelX-Trail
Engine2.0 diesel
Power177.0PS / 130.2kW
Control unit
Control unitBosch EDC17C84
ECU makerBosch
Hardware number237014BD1E
Software number10SW013447
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key78c187d2a56ac29d
Identification read from the file
ECU nameEDC17C84
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW013447Offset in the file: 0x04001A
Vehicle maker's hardware number237014BD1EOffset in the file: 0x22660E
Software / calibrationr170B_A50_Offset in the file: 0x02013C
Internal build stringCB_015_TC1782_2.15.0Offset in the file: 0x000100
Bosch project identifier (EPK)39/1/EDC17_C84/15/P_1251//r170B_A50_///Offset in the file: 0x02013C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C84 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 237014BD1E and software number 10SW013447. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C84

HardwareSoftwareVehicles
10SW043733170C_G40MCE3859TGLMRH43141673Fiat Talento
10SW0693991251_6601037552672Renault Espace
170B_8E0_10SW011017Renault Traffic
237014BD1D10SW017321Nissan X-Trail
237014BD2D10SW018439Nissan X-Trail
237014BD2D10SW022391Nissan X-Trail
237100266V10SW014336Fiat Talento
237100266V10SW099400Renault Trafic

Bosch EDC17C84 original files

The Bosch EDC17C84 unit page