Original file

Renault Talisman Bosch EDC17C84 MCE2217TGLMRH09551673 / 10SW004361

An original (stock) flash read of the Bosch EDC17C84 control unit, fitted in Renault Talisman, hardware number MCE2217TGLMRH09551673 and software number 10SW004361, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Talisman1.6 diesel 160PS
Control unit
Bosch EDC17C84
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
MCE2217TGLMRH09551673
Software number
10SW004361
Vehicle maker's hardware number
237107894R
Software / calibration
r170B_830_

Technical data

Vehicle
BrandRenault
Car modelTalisman
Engine1.6 diesel 160PS
Power160.0PS / 117.7kW
Control unit
Control unitBosch EDC17C84
ECU makerBosch
Hardware numberMCE2217TGLMRH09551673
Software number10SW004361
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key9682b712e281e53b
Identification read from the file
ECU nameEDC17C84
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW004361Offset in the file: 0x04001A
Vehicle maker's hardware number237107894ROffset in the file: 0x223678
Software / calibrationr170B_830_Offset in the file: 0x02013C
Internal build stringCB_015_TC1782_2.13.0Offset in the file: 0x000100
Bosch project identifier (EPK)39/1/EDC17_C84/15/P_1251//r170B_830_///Offset in the file: 0x02013C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C84 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MCE2217TGLMRH09551673 and software number 10SW004361. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C84

Bosch EDC17C84 original files

The Bosch EDC17C84 unit page