Original file

Renault Megane Bosch EDC17C84 MCE4818TGLMRH56991673 / 10SW013486

An original (stock) flash read of the Bosch EDC17C84 control unit, fitted in Renault Megane, hardware number MCE4818TGLMRH56991673 and software number 10SW013486, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Megane1.6 diesel 163PS
Control unit
Bosch EDC17C84
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
MCE4818TGLMRH56991673
Software number
10SW013486
Vehicle maker's hardware number
237109963R
Software / calibration
r170B_A2B_

Technical data

Vehicle
BrandRenault
Car modelMegane
Engine1.6 diesel 163PS
Power163PS / 119.9kW
Control unit
Control unitBosch EDC17C84
ECU makerBosch
Hardware numberMCE4818TGLMRH56991673
Software number10SW013486
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key6c0537493c6d4cf0
Identification read from the file
ECU nameEDC17C84
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW013486Offset in the file: 0x04001A
Vehicle maker's hardware number237109963ROffset in the file: 0x225F9E
Software / calibrationr170B_A2B_Offset in the file: 0x02013C
Internal build stringCB_015_TC1782_2.15.0Offset in the file: 0x000100
Bosch project identifier (EPK)39/1/EDC17_C84/15/P_1251//r170B_A2B_///Offset in the file: 0x02013C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C84 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MCE4818TGLMRH56991673 and software number 10SW013486. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C84

Bosch EDC17C84 original files

The Bosch EDC17C84 unit page