Original file

Renault Espace Bosch EDC17C84 MCE7932TGLMRH40961673 / 1037554230

An original (stock) flash read of the Bosch EDC17C84 control unit, fitted in Renault Espace, hardware number MCE7932TGLMRH40961673 and software number 1037554230, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Espace1.6 diesel · 160.0PS / 117.7kW
Control unit
Bosch EDC17C84
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Hardware number
MCE7932TGLMRH40961673
Software number
1037554230
Vehicle maker's hardware number
237106607R
Software / calibration
r170B_640_

Technical data

Vehicle
BrandRenault
Car modelEspace
Engine1.6 diesel
Power160.0PS / 117.7kW
Control unit
Control unitBosch EDC17C84
ECU makerBosch
Hardware numberMCE7932TGLMRH40961673
Software number1037554230
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keyc296be155bba5414
Identification read from the file
ECU nameEDC17C84
Read typeCalibration only (data set)
Bosch part / software1037554230Offset in the file: 0x02001A
Vehicle maker's hardware number237106607ROffset in the file: 0x22544A
Software / calibrationr170B_640_Offset in the file: 0x020138
Bosch project identifier (EPK)39/1/EDC17_C84/15/P_1251//r170B_640_///Offset in the file: 0x020138

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C84 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MCE7932TGLMRH40961673 and software number 1037554230. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C84

Bosch EDC17C84 original files

The Bosch EDC17C84 unit page