Original file

Fiat Talento Bosch EDC17C84 MCE9472TGLMRH84491673 / 10SW008509

An original (stock) flash read of the Bosch EDC17C84 control unit, fitted in Fiat Talento, hardware number MCE9472TGLMRH84491673 and software number 10SW008509, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Talento1.6 diesel 120PS
Control unit
Bosch EDC17C84
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
MCE9472TGLMRH84491673
Software number
10SW008509
Software / calibration
r170B_8E0_

Technical data

Vehicle
BrandFiat
Car modelTalento
Engine1.6 diesel 120PS
Power120.0PS / 88.3kW
Control unit
Control unitBosch EDC17C84
ECU makerBosch
Hardware numberMCE9472TGLMRH84491673
Software number10SW008509
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key95db685bde02c32c
Identification read from the file
ECU nameEDC17C84
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW008509Offset in the file: 0x04001A
Software / calibrationr170B_8E0_Offset in the file: 0x02013C
Internal build stringCB_015_TC1782_2.15.0Offset in the file: 0x000100
Bosch project identifier (EPK)39/1/EDC17_C84/15/P_1251//r170B_8E0_///Offset in the file: 0x02013C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C84 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MCE9472TGLMRH84491673 and software number 10SW008509. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C84

HardwareSoftwareVehicles
MCE8CC41073C29CC4107310SW017260Nissan X-Trail
MCE9082TGLMRH0611167310SW021401Renault Scenic
MCE9357TGLMRH6568167310SW082585Renault Traffic III
MCE9381TGLMRH9439167310SW004360Renault Talisman
MCE9472TGLMRH8449167310SW011004Opel Vivaro
MCE9545TGLMRH1549167310SW008509Renault Traffic III
SW09971417010SW099714Renault Trafic
W039978125110SW039978Renault Clio, Renault Clio IV

Bosch EDC17C84 original files

The Bosch EDC17C84 unit page