Original file

Mercedes-Benz GLK320 Bosch EDC17CP01 0281015730 / 1037501651

An original (stock) flash read of the Bosch EDC17CP01 control unit, fitted in Mercedes-Benz GLK320, hardware number 0281015730 and software number 1037501651, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLK3203.0 diesel 165KW
Control unit
Bosch EDC17CP01
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281015730
Software number
1037501651
Software / calibration
6429026200

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLK320
Engine3.0 diesel 165KW
Control unit
Control unitBosch EDC17CP01
ECU makerBosch
Hardware number0281015730
Software number1037501651
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key8eb2d9c171c89f19
Identification read from the file
ECU nameEDC17CP01
Read typeCalibration only (data set)
Bosch part / software1037501651Offset in the file: 0x19001A
Software / calibration6429026200Offset in the file: 0x1B32CA
Bosch project identifier (EPK)46/1/EDC17CP01/1/P448//P_448_6_6_0_CV091100///Offset in the file: 0x190A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP01 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281015730 and software number 1037501651. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP01

HardwareSoftwareVehicles
02810144281037389349Mercedes-Benz C320 V6 2008 Turbo
02810144291037389347Mercedes-Benz C320 V6 2009 Turbo, Mercedes-Benz C320, Mercedes-Benz C350
02810150661037386271Mercedes-Benz C320
02810150661037392631Mercedes-Benz C320
02810159851037396521Mercedes-Benz C320 V6 2010 Turbo
CR6-642-45S4-204WA-165kW-EU4OP-003c_ME01c1037384369Mercedes-Benz C320
CR6-642-45S5-204WA-165KW-EU4OP-009C_ME02C1037384369Mercedes-Benz C
CR6-642-45S8-204WSA-165KW-EU4OP-004C_ME041037386271Mercedes-Benz C320, Mercedes-Benz C

Bosch EDC17CP01 original files

The Bosch EDC17CP01 unit page