Original file

Mercedes-Benz C Bosch EDC17CP01 CR6-642-55S2-204SA-165KW-EU4OP_4X4-005_ME08 / 1037389349

An original (stock) flash read of the Bosch EDC17CP01 control unit, fitted in Mercedes-Benz C, hardware number CR6-642-55S2-204SA-165KW-EU4OP_4X4-005_ME08 and software number 1037389349, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Cdiesel 211PS
Control unit
Bosch EDC17CP01
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
CR6-642-55S2-204SA-165KW-EU4OP_4X4-005_ME08
Software number
1037389349
Bosch part / software
1037396519
Software / calibration
6429020300

Technical data

Vehicle
BrandMercedes-Benz
Car modelC
Enginediesel 211PS
Power211.0PS / 155.2kW
Control unit
Control unitBosch EDC17CP01
ECU makerBosch
Hardware numberCR6-642-55S2-204SA-165KW-EU4OP_4X4-005_ME08
Software number1037389349
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keya556d015b8c01ede
Identification read from the file
ECU nameEDC17CP01
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037396519Offset in the file: 0x04001A
Software / calibration6429020300Offset in the file: 0x0214E6
Bosch project identifier (EPK)46/1/EDC17CP01/1/P448//P_448_6_5_2_CV081200///Offset in the file: 0x057608

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP01 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR6-642-55S2-204SA-165KW-EU4OP_4X4-005_ME08 and software number 1037389349. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP01

HardwareSoftwareVehicles
CR6-642-50S1-204WSM-165kW-EU4O-007c_ME051037392632Mercedes-Benz C230, Mercedes-Benz W204
CR6-642-50S1-204WSM-165kW-EU4OP-007c_ME051037392631Mercedes-Benz C
CR6-642-50S1-204XA-165KW-EU4OP-027C_ME031037396507Mercedes-Benz GLK, Mercedes-Benz GLK320, Mercedes-Benz GLK-Class
CR6-642-50S1-204XA-165kW-EU4OP-027c_ME031037396507Mercedes-Benz GLK320, Mercedes-Benz GLK320 V6 Turbo Diesel, Mercedes-Benz C
CR6-642-55S2-204SA-165KW-EU4OP_4X4-005_ME081037396519Mercedes-Benz C350, Mercedes-Benz C
CR6-642-55S2-204WA-165KW-EU4OP-005_ME081037389347Mercedes-Benz C, Mercedes-Benz C320 s2 dpf egr vm
CR6-642-55S2-204WA-165KW-EU4OP-005_ME081037392631Mercedes-Benz C
CR6-642-55S2-204WA-165KW-EU4OP-005_ME081037393886Mercedes-Benz C-Class

Bosch EDC17CP01 original files

The Bosch EDC17CP01 unit page