Original file

Mercedes-Benz GLK350 Bosch EDC17CP01 CR6-642-55S2-204XA-165KW-EU4OP-007C_ME04C / 1037400326

An original (stock) flash read of the Bosch EDC17CP01 control unit, fitted in Mercedes-Benz GLK350, hardware number CR6-642-55S2-204XA-165KW-EU4OP-007C_ME04C and software number 1037400326, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLK3503.0 diesel 224PS
Control unit
Bosch EDC17CP01
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
CR6-642-55S2-204XA-165KW-EU4OP-007C_ME04C
Software number
1037400326
Software / calibration
6429024400

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLK350
Engine3.0 diesel 224PS
Power224.3PS / 165.0kW
Control unit
Control unitBosch EDC17CP01
ECU makerBosch
Hardware numberCR6-642-55S2-204XA-165KW-EU4OP-007C_ME04C
Software number1037400326
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyed08037c8c6dcc45
Identification read from the file
ECU nameEDC17CP01
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037400326Offset in the file: 0x04001A
Software / calibration6429024400Offset in the file: 0x1B329E
Bosch project identifier (EPK)46/1/EDC17CP01/1/P448//P_448_6_5_2_CV081200///Offset in the file: 0x057608

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP01 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR6-642-55S2-204XA-165KW-EU4OP-007C_ME04C and software number 1037400326. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-BenzFlash2,048.00 KB€15Add to cart
Mercedes-Benz GLKFlash2,048.00 KB€15Add to cart
Mercedes-BenzFlash2,048.00 KB€15Add to cart
Mercedes-Benz GLK350Flash2,048.00 KB€15Add to cart
Mercedes-Benz GLK320Flash2,048.00 KB€15Add to cart

All reads of CR6-642-55S2-204XA-165KW-EU4OP-007C_ME04C / 1037400326

Other pairs of Bosch EDC17CP01

Bosch EDC17CP01 original files

The Bosch EDC17CP01 unit page