Original file

Mercedes-Benz GLK320 Bosch EDC17CP01 CR6-642-56S0-204XA-165KW-EU4OP-011C_ME08 / 1037512412

An original (stock) flash read of the Bosch EDC17CP01 control unit, fitted in Mercedes-Benz GLK320, hardware number CR6-642-56S0-204XA-165KW-EU4OP-011C_ME08 and software number 1037512412, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLK3203.0 diesel 224PS
Control unit
Bosch EDC17CP01
Read type
Calibration only (data set)
File
512.00 KB · Flash
Hardware number
CR6-642-56S0-204XA-165KW-EU4OP-011C_ME08
Software number
1037512412
Software / calibration
6429022401

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLK320
Engine3.0 diesel 224PS
Power224.0PS / 164.8kW
Control unit
Control unitBosch EDC17CP01
ECU makerBosch
Hardware numberCR6-642-56S0-204XA-165KW-EU4OP-011C_ME08
Software number1037512412
File
File typeOriginal flash read
File size512.00 KB (524,288 bytes)
File key227568824ce5a64b
Identification read from the file
ECU nameEDC17CP01
Read typeCalibration only (data set)
Bosch part / software1037512412Offset in the file: 0x01001A
Software / calibration6429022401Offset in the file: 0x0332CA
Bosch project identifier (EPK)46/1/EDC17CP01/1/P448//P_448_6_6_0_CV091100///Offset in the file: 0x010A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP01 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR6-642-56S0-204XA-165KW-EU4OP-011C_ME08 and software number 1037512412. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP01

HardwareSoftwareVehicles
CR6-642-56S0-204WSM-165kW-EU4OP-006c_ME091037501656Mercedes-Benz CLASSE C 320CDI 2009, Mercedes-Benz C
CR6-642-56S0-204XA-165KW-EU4OP-006C_ME071037396507Mercedes-Benz GLK350, Mercedes-Benz GLK
CR6-642-56S0-204XA-165KW-EU4OP-011C_ME081037396507Mercedes-Benz GLK350, Mercedes-Benz GLK, Mercedes-Benz C
CR6-642-56S0-204XA-165KW-EU4OP-011C_ME081037400326Mercedes-Benz GLK320, Mercedes-Benz GLK
CR6-642-56S0-204XA-165KW-EU4OP-012C_ME091037396507Mercedes-Benz GLK350, Mercedes-Benz GLK
CR6-642-56S0-204XA-165kW-EU4OP-006c_ME071037396507Mercedes-Benz GLK320
CR6-642-56S0-204XA-165kW-EU4OP-011c_ME081037512412Mercedes-Benz 350CDI
CR6-642-56S0-204XA-165kW-EU4OP-012c_ME091037396507Mercedes-Benz GLK, Mercedes-Benz GLK350

Bosch EDC17CP01 original files

The Bosch EDC17CP01 unit page