Original file

BMW E83 Bosch EDC17CP02 O_70MEHC208A / 1037391389

An original (stock) flash read of the Bosch EDC17CP02 control unit, fitted in BMW E83, hardware number O_70MEHC208A and software number 1037391389, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW E832.0 diesel 120PS
Control unit
Bosch EDC17CP02
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
O_70MEHC208A
Software number
1037391389

Technical data

Vehicle
BrandBMW
Car modelE83
Engine2.0 diesel 120PS
Power120.0PS / 88.3kW
Control unit
Control unitBosch EDC17CP02
ECU makerBosch
Hardware numberO_70MEHC208A
Software number1037391389
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyd57012f3375a9543
Identification read from the file
ECU nameEDC17CP02
Read typeCalibration only (data set)
Bosch part / software1037391389Offset in the file: 0x04001A
Bosch project identifier (EPK)833/1/EDC17_CP02/11/P_595//V0ME///Offset in the file: 0x0400CB

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP02 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number O_70MEHC208A and software number 1037391389. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP02

HardwareSoftwareVehicles
O_70MEHC189A1037391389BMW x3 2.0d 2008 Turbo
O_70MEHC190A1037391389BMW X3, BMW 2.0d 2008 Turbo Diesel, BMW E83
O_70MEHC205A1037391389BMW X3, BMW E83, BMW E83 2.0d 2008 Turbo
O_70MEHC206A1037391389BMW X3, BMW x3 2.0d 2008 Turbo, BMW E83
O_70MEHC209A1037391389BMW X3
O_70MEHC210A1037391389BMW x3, BMW X1, BMW X3
O_70MJHC211A1037394081BMW E83, BMW X3, BMW x3
O_70MJHC212A1037394081BMW X3, BMW E83, BMW x3

Bosch EDC17CP02 original files

The Bosch EDC17CP02 unit page