Original file

Audi A5 CR 2008 Turbo Bosch EDC17CP04 8K0907401 / 1037507609

An original (stock) flash read of the Bosch EDC17CP04 control unit, fitted in Audi A5 CR 2008 Turbo, hardware number 8K0907401 and software number 1037507609, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A5 CR 2008 Turbo2.7 diesel · 190.3PS / 140.0kW
Control unit
Bosch EDC17CP04
Read type
Calibration only (data set)
File
512.00 KB · Flash
Hardware number
8K0907401
Software number
1037507609
Software / calibration
8K1907401D

Technical data

Vehicle
BrandAudi
Car modelA5 CR 2008 Turbo
Engine2.7 diesel
Power190.3PS / 140.0kW
Control unit
Control unitBosch EDC17CP04
ECU makerBosch
Hardware number8K0907401
Software number1037507609
File
File typeOriginal flash read
File size512.00 KB (524,288 bytes)
From the file nameAudi A5 2.7 TDI CR
File key7c89532c2f071c3e
Identification read from the file
ECU nameEDC17CP04
Read typeCalibration only (data set)
Bosch part / software1037507609Offset in the file: 0x02001A
Vehicle maker's hardware number8K0907401Offset in the file: 0x04080A
Software / calibration8K1907401D · version 0011Offset in the file: 0x040821
Bosch project identifier (EPK)35/1/EDC17_CP04/5/P531//C531B3OA///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP04 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K0907401 and software number 1037507609. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP04

HardwareSoftwareVehicles
8K09074011037394958Audi A4 V6 Turbo Diesel, Audi A5 CR 2008 Turbo
8K09074011037394960Audi A5 CR 2008 Turbo
8K09074011037399857Audi A4, Audi A5, Audi A5 2002 Turbo Diesel
8K09074011037501407Audi A4, Audi pcmflash, Audi A5
8K09074011037510327Audi A5 2007 Turbo Diesel
8K09074011037510328Audi A5, Audi A4, Audi A4 3.0 TDI
8K09074011037510946Audi A5 CR DPF Turbo
8K0907401F1037392911Audi A4 3.0 TDI, Audi A4

Bosch EDC17CP04 original files

The Bosch EDC17CP04 unit page