Original file

Audi A4 Bosch EDC17CP04 8K1907401F / 1037510330

An original (stock) flash read of the Bosch EDC17CP04 control unit, fitted in Audi A4, hardware number 8K1907401F and software number 1037510330, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A42.7 diesel · 163.2PS / 120.0kW
Control unit
Bosch EDC17CP04
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
8K1907401F
Software number
1037510330
Vehicle maker's hardware number
8K0907401

Technical data

Vehicle
BrandAudi
Car modelA4
Engine2.7 diesel
Power163.2PS / 120.0kW
Control unit
Control unitBosch EDC17CP04
ECU makerBosch
Hardware number8K1907401F
Software number1037510330
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye5e5aad72eecd7a1
Identification read from the file
ECU nameEDC17CP04
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037510330Offset in the file: 0x02001A
Vehicle maker's hardware number8K0907401Offset in the file: 0x1C080A
Software / calibration8K1907401F · version 0012Offset in the file: 0x1C0821
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)35/1/EDC17_CP04/5/P531//C531B3OA///Offset in the file: 0x038448

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP04 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K1907401F and software number 1037510330. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A5 2.7TDIFlash2,048.00 KB€15Add to cart
AudiFlash512.00 KB€15Add to cart
Audi A5Flash2,048.00 KB€15Add to cart
Audi A5Flash2,048.00 KB€15Add to cart
Audi A5Flash4,096.00 KB€15Add to cart
Audi pcmflashFlash2,048.00 KB€15Add to cart

All reads of 8K1907401F / 1037510330

Other pairs of Bosch EDC17CP04

HardwareSoftwareVehicles
8K1907401D1037504705Audi A5, Audi A4 2.7 TDI, Audi pcmflash
8K1907401D1037507609Audi A4 2.7 TDI, Audi A5 2.7 TDI, Audi 2.7 TDI
8K1907401D1037510327Audi A5, Audi A4, Audi A4 2.7 TDI Multitronic - 190hp
8K1907401F1037392964Audi A5, Audi A5 2.7 TDI, Audi A4 CR 2009 Turbo
8K1907401F1037394117Audi A5, Audi A4
8K1907401F1037394959Audi A5, Audi A6 2.0 TDIe CR
8K1907401F1037504706Audi pcmflash, Audi A5 2.7TDI
8K1907401F1037507610Audi pcmflash, Audi A5 2.7TDI

Bosch EDC17CP04 original files

The Bosch EDC17CP04 unit page