Original file

Ford ST27 F750 TC1797 Bosch EDC17CP05 0281034819 / 1037021058

An original (stock) flash read of the Bosch EDC17CP05 control unit, fitted in Ford ST27 F750 TC1797, hardware number 0281034819 and software number 1037021058, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford ST27 F750 TC1797
Control unit
Bosch EDC17CP05
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
0281034819
Software number
1037021058
Bosch part / software
10SW031543
Vehicle maker's hardware number
JC4A-12A650-RA
Software / calibration
JC4A-12B684-DA

Technical data

Vehicle
BrandFord
Car modelST27 F750 TC1797
Control unit
Control unitBosch EDC17CP05
ECU makerBosch
Hardware number0281034819
Software number1037021058
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameFORD ST27 F750 TC1797 EDC17CP05
File key39d5b49796ca876d
Identification read from the file
ECU nameEDC17CP05
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software10SW031543Offset in the file: 0x02001A
Vehicle maker's hardware numberJC4A-12A650-RAOffset in the file: 0x00FD30
Software / calibrationJC4A-12B684-DAOffset in the file: 0x00FD00
Engine descriptionJC4A-14C204-GDOffset in the file: 0x27FF4B
Bosch project identifier (EPK)37/1/EDC17CP05/57/P1642//P1642_410///Offset in the file: 0x2801EC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP05 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281034819 and software number 1037021058. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Ford ST27 F750 TC1797Flash · From the file name: FORD ST27 F750 TC1797 EDC17CP051,669.24 KB€15Add to cart
Ford ST27 F750 TC1797Flash · From the file name: FORD ST27 F750 TC1797 EDC17CP0564.00 KB€15Add to cart

All reads of 0281034819 / 1037021058

Other pairs of Bosch EDC17CP05

HardwareSoftwareVehicles
1037562176Ford F350
1037562177Ford F350, Ford F-350
1037562178Ford
02810193531037562177Ford F350
BC3A-14C204-DNA1037508553Ford F250
BC3A-14C204-FEA1037511168Ford F250
BC3A-14C204-FGA1037511170Ford F-250
BU7A-14C204-DAC1037523460Ford F-250 6.7D V8

Bosch EDC17CP05 original files

The Bosch EDC17CP05 unit page