Original file

Ford F350 Bosch EDC17CP05 CC3A-14C204-ANH / 1037556612

An original (stock) flash read of the Bosch EDC17CP05 control unit, fitted in Ford F350, hardware number CC3A-14C204-ANH and software number 1037556612, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford F3506.7 268PS
Control unit
Bosch EDC17CP05
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
CC3A-14C204-ANH
Software number
1037556612

Technical data

Vehicle
BrandFord
Car modelF350
Engine6.7 268PS
Power268PS / 197.1kW
Control unit
Control unitBosch EDC17CP05
ECU makerBosch
Hardware numberCC3A-14C204-ANH
Software number1037556612
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyef7934d94a866ee1
Identification read from the file
ECU nameEDC17CP05
Read typeFull read (boot area included)
Bosch part / software1037556612Offset in the file: 0x10001A
Software / calibrationCC3A-14C204-ANHOffset in the file: 0x0C3AF9
Bosch project identifier (EPK)40/1/EDC17_CP05/57/P545//P545_D2_1571///Offset in the file: 0x040104

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP05 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CC3A-14C204-ANH and software number 1037556612. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP05

Bosch EDC17CP05 original files

The Bosch EDC17CP05 unit page