Original file

Ford F250 Bosch EDC17CP05 FC3A-14C204-BLC / 1037556622

An original (stock) flash read of the Bosch EDC17CP05 control unit, fitted in Ford F250, hardware number FC3A-14C204-BLC and software number 1037556622, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford F2506.7 440PS
Control unit
Bosch EDC17CP05
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
FC3A-14C204-BLC
Software number
1037556622

Technical data

Vehicle
BrandFord
Car modelF250
Engine6.7 440PS
Power440PS / 323.6kW
Control unit
Control unitBosch EDC17CP05
ECU makerBosch
Hardware numberFC3A-14C204-BLC
Software number1037556622
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keya8b4c88f6cd58081
Identification read from the file
ECU nameEDC17CP05
Read typeFull read (boot area included)
Bosch part / software1037556622Offset in the file: 0x02001A
Software / calibrationFC3A-14C204-BLCOffset in the file: 0x20004B
Bosch project identifier (EPK)41/1/EDC17_CP05/57/P1356//P1356_C5_530///Offset in the file: 0x040A4C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP05 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number FC3A-14C204-BLC and software number 1037556622. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP05

Bosch EDC17CP05 original files

The Bosch EDC17CP05 unit page