Original file

Ford F250 Bosch EDC17CP05 GC3A-14C204-BBB / 1037536384

An original (stock) flash read of the Bosch EDC17CP05 control unit, fitted in Ford F250, hardware number GC3A-14C204-BBB and software number 1037536384, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford F2506.7 404PS
Control unit
Bosch EDC17CP05
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
GC3A-14C204-BBB
Software number
1037536384
Bosch part / software
10SW072718

Technical data

Vehicle
BrandFord
Car modelF250
Engine6.7 404PS
Power404PS / 297.1kW
Control unit
Control unitBosch EDC17CP05
ECU makerBosch
Hardware numberGC3A-14C204-BBB
Software number1037536384
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key2853f91cee649662
Identification read from the file
ECU nameEDC17CP05
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW072718Offset in the file: 0x02001A
Software / calibrationGC3A-14C204-BBBOffset in the file: 0x20004B
Bosch project identifier (EPK)41/1/EDC17_CP05/57/P1356//P1356_C5_950///Offset in the file: 0x041AD4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP05 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GC3A-14C204-BBB and software number 1037536384. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP05

Bosch EDC17CP05 original files

The Bosch EDC17CP05 unit page