Original file

Ford F250 SIMON !! Bosch EDC17CP05 GC3A-14C204-FF / 1037558211

An original (stock) flash read of the Bosch EDC17CP05 control unit, fitted in Ford F250 SIMON !!, hardware number GC3A-14C204-FF and software number 1037558211, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford F250 SIMON !!
Control unit
Bosch EDC17CP05
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
GC3A-14C204-FF
Software number
1037558211

Technical data

Vehicle
BrandFord
Car modelF250 SIMON !!
Control unit
Control unitBosch EDC17CP05
ECU makerBosch
Hardware numberGC3A-14C204-FF
Software number1037558211
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key9c9875a847f5ed62
Identification read from the file
ECU nameEDC17CP05
Read typeFull read (boot area included)
Bosch part / software1037558211Offset in the file: 0x02001A
Software / calibrationGC3A-14C204-FFOffset in the file: 0x20004B
Bosch project identifier (EPK)41/1/EDC17_CP05/57/P1356//P1356_C5_910///Offset in the file: 0x041AD4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP05 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GC3A-14C204-FF and software number 1037558211. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP05

Bosch EDC17CP05 original files

The Bosch EDC17CP05 unit page