Original file

Honda Bosch EDC17CP06 37805-RL1-G270 / 1037532330

An original (stock) flash read of the Bosch EDC17CP06 control unit, fitted in Honda, hardware number 37805-RL1-G270 and software number 1037532330, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Honda2.2 diesel 180PS
Control unit
Bosch EDC17CP06
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
37805-RL1-G270
Software number
1037532330
Software / calibration
P519V194

Technical data

Vehicle
BrandHonda
Car modelHonda
Engine2.2 diesel 180PS
Power180.0PS / 132.4kW
Control unit
Control unitBosch EDC17CP06
ECU makerBosch
Hardware number37805-RL1-G270
Software number1037532330
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameHonda 2.2 CDTI 2010 180PS
File keyb35c105f000b0124
Identification read from the file
ECU nameEDC17CP06
Read typeCalibration only (data set)
Bosch part / software1037532330Offset in the file: 0x18801A
Software / calibrationP519V194Offset in the file: 0x188A10
Bosch project identifier (EPK)37/1/EDC17_CP06/159/P519//P519V194///Offset in the file: 0x188A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP06 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 37805-RL1-G270 and software number 1037532330. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP06

Bosch EDC17CP06 original files

The Bosch EDC17CP06 unit page