Original file

Mercedes-Benz ML Bosch EDC17CP10 0054463840 / 1037396518

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz ML, hardware number 0054463840 and software number 1037396518, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz ML3.0 diesel 211PS
Control unit
Bosch EDC17CP10
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
0054463840
Software number
1037396518
Software / calibration
6429020000

Technical data

Vehicle
BrandMercedes-Benz
Car modelML
Engine3.0 diesel 211PS
Power211.0PS / 155.2kW
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number0054463840
Software number1037396518
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye96b490c34897250
Identification read from the file
ECU nameEDC17CP10
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037396518Offset in the file: 0x02001A
Software / calibration6429020000Offset in the file: 0x183EDA
Bosch project identifier (EPK)46/1/EDC17CP10/1/P568//P_568_56B4__CV082600///Offset in the file: 0x03FB6C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0054463840 and software number 1037396518. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz GLFlash2,048.00 KB€15Add to cart

All reads of 0054463840 / 1037396518

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
1037525422Mercedes-Benz Benz GL X164 350CDI
1037529303Mercedes-Benz G
1037529310Mercedes-Benz G350
1037543370Mercedes-Benz G
00544694401037503294Mercedes-Benz VITO122 3.0 V6, Mercedes-Benz Sprinter219/319/419/519
00544694401037510881Mercedes-Benz Sprinter219/319/419/519
02493821601037500230Mercedes-Benz G350
02810159541037396518Mercedes-Benz ML

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page