Original file

Mercedes-Benz Sprinter219/319/419/519 Bosch EDC17CP10 0054469440 / 1037510881

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz Sprinter219/319/419/519, hardware number 0054469440 and software number 1037510881, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter219/319/419/5193.0 diesel 140KW
Control unit
Bosch EDC17CP10
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0054469440
Software number
1037510881
Software / calibration
6429029000

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter219/319/419/519
Engine3.0 diesel 140KW
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number0054469440
Software number1037510881
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key820ec966aba6a03a
Identification read from the file
ECU nameEDC17CP10
Read typeCalibration only (data set)
Bosch part / software1037510881Offset in the file: 0x18801A
Software / calibration6429029000Offset in the file: 0x1824D6
Data set number6429039301Offset in the file: 0x1824E1
Bosch project identifier (EPK)45/1/EDC17CP10/1/P695//P_695_61N6_CV094700///Offset in the file: 0x188BAC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0054469440 and software number 1037510881. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
1037529310Mercedes-Benz G350
1037543370Mercedes-Benz G
00544638401037396518Mercedes-Benz GL, Mercedes-Benz ML
00544694401037503294Mercedes-Benz VITO122 3.0 V6, Mercedes-Benz Sprinter219/319/419/519
02493821601037500230Mercedes-Benz G350
02810159541037396518Mercedes-Benz ML
02810163511037397116Mercedes-Benz E 350CDI V6
02810163511037512429Mercedes-Benz W207 E 3.0CDI

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page