Original file

Mercedes-Benz G350 Bosch EDC17CP10 0249382160 / 1037500230

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz G350, hardware number 0249382160 and software number 1037500230, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz G3503.5 diesel 211PS
Control unit
Bosch EDC17CP10
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0249382160
Software number
1037500230
Bosch part / software
1037529304
Software / calibration
6429026800

Technical data

Vehicle
BrandMercedes-Benz
Car modelG350
Engine3.5 diesel 211PS
Power211.0PS / 155.2kW
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number0249382160
Software number1037500230
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key263fdcfdcea1d91e
Identification read from the file
ECU nameEDC17CP10
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037529304Offset in the file: 0x02001A
Software / calibration6429026800Offset in the file: 0x00FC59
Data set number6429031708Offset in the file: 0x1BBA15
Bosch project identifier (EPK)45/1/EDC17CP10/1/P695//P_695_6EN5_CV130900///Offset in the file: 0x041FC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0249382160 and software number 1037500230. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
1037543370Mercedes-Benz G
00544638401037396518Mercedes-Benz GL, Mercedes-Benz ML
00544694401037503294Mercedes-Benz VITO122 3.0 V6, Mercedes-Benz Sprinter219/319/419/519
00544694401037510881Mercedes-Benz Sprinter219/319/419/519
02810159541037396518Mercedes-Benz ML
02810163511037397116Mercedes-Benz E 350CDI V6
02810163511037512429Mercedes-Benz W207 E 3.0CDI
02810163831037392553Mercedes-Benz Benz E350 231 BHP

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page