Original file

Mercedes-Benz W207 E 3.0CDI Bosch EDC17CP10 0281016351 / 1037512429

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz W207 E 3.0CDI, hardware number 0281016351 and software number 1037512429, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz W207 E 3.0CDI3.0 diesel 170KW
Control unit
Bosch EDC17CP10
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0281016351
Software number
1037512429
Bosch part / software
1037505845
Software / calibration
6429022000

Technical data

Vehicle
BrandMercedes-Benz
Car modelW207 E 3.0CDI
Engine3.0 diesel 170KW
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number0281016351
Software number1037512429
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameMercedes W207 EDC17CP10 170kW
File key25a1d1fe669d8fb3
Identification read from the file
ECU nameEDC17CP10
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037505845Offset in the file: 0x02001A
Software / calibration6429022000Offset in the file: 0x00F010
Data set number6429039801Offset in the file: 0x1BBB23
Bosch project identifier (EPK)46/1/EDC17CP10/1/P695//P_695_49D1__CV094900///Offset in the file: 0x03FE3C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281016351 and software number 1037512429. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
00544694401037510881Mercedes-Benz Sprinter219/319/419/519
02493821601037500230Mercedes-Benz G350
02810159541037396518Mercedes-Benz ML
02810163511037397116Mercedes-Benz E 350CDI V6
02810163831037392553Mercedes-Benz Benz E350 231 BHP
02810163831037397161Mercedes-Benz E350
02810163831037501660Mercedes-Benz E350
02810163831037505823Mercedes-Benz E300

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page