Original file

Mercedes-Benz C 350 2010 Turbo Bosch EDC17CP10 0281016383 / 1037510865

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz C 350 2010 Turbo, hardware number 0281016383 and software number 1037510865, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C 350 2010 Turbodiesel 170KW
Control unit
Bosch EDC17CP10
Read type
Calibration only (data set)
File
512.00 KB · Flash
Hardware number
0281016383
Software number
1037510865
Software / calibration
6429027700

Technical data

Vehicle
BrandMercedes-Benz
Car modelC 350 2010 Turbo
Enginediesel 170KW
Displacement3.0
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number0281016383
Software number1037510865
File
File typeOriginal flash read
File size512.00 KB (524,288 bytes)
From the file nameMB 350 CDI 2010 Turbo
File keyfc265da7888583db
Identification read from the file
ECU nameEDC17CP10
Read typeCalibration only (data set)
Bosch part / software1037510865Offset in the file: 0x00A01A
Software / calibration6429027700Offset in the file: 0x03BB18
Data set number6429037301Offset in the file: 0x03BB23
Bosch project identifier (EPK)46/1/EDC17CP10/1/P695//P_695_49D1__CV094900///Offset in the file: 0x00AA10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281016383 and software number 1037510865. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
02810163831037392553Mercedes-Benz Benz E350 231 BHP
02810163831037397161Mercedes-Benz E350
02810163831037501660Mercedes-Benz E350
02810163831037505823Mercedes-Benz E300
02810163831037512436Mercedes-Benz E350
02810165871037500230Mercedes-Benz GL, Mercedes-Benz ML
02810165871037508963Mercedes-Benz W212
02810165871037516301Mercedes-Benz GL

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page