Original file

Mercedes-Benz Sprinter Bosch EDC17CP10 0281016977 / 1037516372

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz Sprinter, hardware number 0281016977 and software number 1037516372, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter165KW
Control unit
Bosch EDC17CP10
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0281016977
Software number
1037516372
Software / calibration
6429022201

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter
Engine165KW
FuelDiesel
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number0281016977
Software number1037516372
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key62b79bb9c0d32f96
Identification read from the file
ECU nameEDC17CP10
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037516372Offset in the file: 0x02001A
Software / calibration6429022201Offset in the file: 0x03EE23
Data set number6429030204Offset in the file: 0x1BDDC5
Boot software6429040100Offset in the file: 0x00FC59
Bosch project identifier (EPK)45/1/EDC17CP10/1/P695//P_695_6DN6_CV112900///Offset in the file: 0x040E04

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281016977 and software number 1037516372. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
02810165871037529339Mercedes-Benz E350
02810167991037503294Mercedes-Benz VITO122
02810169771037503294Mercedes-Benz Vito 122 CDI, Mercedes-Benz VITO122
02810169771037516344Mercedes-Benz Sprinter 319
02810169771037529284Mercedes-Benz Sprinter219 319 419 519
08480020101037500230Mercedes-Benz GL
10375254011037501644Mercedes-Benz Sprinter219/319/419/519 3.0 CDI V6
3ZNW-165KW-EU51037503294Mercedes-Benz Vito, Mercedes-Benz VITO122, Mercedes-Benz Viano

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page