Original file

Mercedes-Benz Sprinter219 319 419 519 Bosch EDC17CP10 0281016977 / 1037529284

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz Sprinter219 319 419 519, hardware number 0281016977 and software number 1037529284, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter219 319 419 5193.0 diesel 140KW
Control unit
Bosch EDC17CP10
Read type
Calibration only (data set)
File
512.00 KB · Flash
Hardware number
0281016977
Software number
1037529284
Software / calibration
6429027601

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter219 319 419 519
Engine3.0 diesel 140KW
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number0281016977
Software number1037529284
File
File typeOriginal flash read
File size512.00 KB (524,288 bytes)
From the file nameMB Sprinter219 319 419 519
File key55fe53425c456ed4
Identification read from the file
ECU nameEDC17CP10
Read typeCalibration only (data set)
Bosch part / software1037529284Offset in the file: 0x00801A
Software / calibration6429027601Offset in the file: 0x003652
Data set number6429034304Offset in the file: 0x00365D
Bosch project identifier (EPK)45/1/EDC17CP10/1/P695//P_695_6KN0_CV121400///Offset in the file: 0x008BAC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281016977 and software number 1037529284. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
02810167991037503294Mercedes-Benz VITO122
02810169771037503294Mercedes-Benz Vito 122 CDI, Mercedes-Benz VITO122
02810169771037516344Mercedes-Benz Sprinter 319
02810169771037516372Mercedes-Benz Sprinter
08480020101037500230Mercedes-Benz GL
10375254011037501644Mercedes-Benz Sprinter219/319/419/519 3.0 CDI V6
3ZNW-165KW-EU51037503294Mercedes-Benz Vito, Mercedes-Benz VITO122, Mercedes-Benz Viano
3ZNW-165KW-EU51037512400Mercedes-Benz Vito, Mercedes-Benz VIANO 30CDI 2011 164.8KWKW

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page