Original file

Mercedes-Benz GL Bosch EDC17CP10 0848002010 / 1037500230

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz GL, hardware number 0848002010 and software number 1037500230, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLdiesel 210PS
Control unit
Bosch EDC17CP10
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0848002010
Software number
1037500230
Bosch part / software
1037503245
Software / calibration
6429026800

Technical data

Vehicle
BrandMercedes-Benz
Car modelGL
Enginediesel 210PS
Displacement3.0
Power210.0PS / 154.5kW
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number0848002010
Software number1037500230
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye2427e6192723002
Identification read from the file
ECU nameEDC17CP10
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037503245Offset in the file: 0x02001A
Software / calibration6429026800Offset in the file: 0x00FC59
Data set number6429037500Offset in the file: 0x181C61
Bosch project identifier (EPK)45/1/EDC17CP10/1/P695//P_695_61N4_CV093200///Offset in the file: 0x040EDC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0848002010 and software number 1037500230. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
02810169771037503294Mercedes-Benz Vito 122 CDI, Mercedes-Benz VITO122
02810169771037516344Mercedes-Benz Sprinter 319
02810169771037516372Mercedes-Benz Sprinter
02810169771037529284Mercedes-Benz Sprinter219 319 419 519
10375254011037501644Mercedes-Benz Sprinter219/319/419/519 3.0 CDI V6
3ZNW-165KW-EU51037503294Mercedes-Benz Vito, Mercedes-Benz VITO122, Mercedes-Benz Viano
3ZNW-165KW-EU51037512400Mercedes-Benz Vito, Mercedes-Benz VIANO 30CDI 2011 164.8KWKW
3ZNW-165KW-EU51037512483Mercedes-Benz Vito

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page