Original file

Mercedes-Benz GL Bosch EDC17CP10 1037392485

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz GL, software number 1037392485, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GL3.0 diesel 210PS
Control unit
Bosch EDC17CP10
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Software number
1037392485
Bosch part / software
1037396518
Software / calibration
6429020000

Technical data

Vehicle
BrandMercedes-Benz
Car modelGL
Engine3.0 diesel 210PS
Power210.0PS / 154.5kW
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Software number1037392485
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keydfda73a1e7a6fa8f
Identification read from the file
ECU nameEDC17CP10
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037396518Offset in the file: 0x02001A
Software / calibration6429020000Offset in the file: 0x183EDA
Bosch project identifier (EPK)46/1/EDC17CP10/1/P568//P_568_56B4__CV082600///Offset in the file: 0x03FB6C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 1037392485. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
Bosch EDC17CP10
Mercedes-Benz Sprinter224/324/424/524Mercedes-Benz Sprinter224/324/424/524
1037393842Mercedes-Benz ML
1037396518Mercedes-Benz ML, Mercedes-Benz GL, Mercedes-Benz R320
1037397114Mercedes-Benz Sprinter208/308/408
1037397161Mercedes-Benz
1037500230Mercedes-Benz G, Mercedes-Benz G350, Mercedes-Benz G-Class
1037500252Mercedes-Benz ML, Mercedes-Benz ML320 2009y 3.0CDI

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page