Original file

Mercedes-Benz Sprinter208/308/408 Bosch EDC17CP10 1037397114

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz Sprinter208/308/408, software number 1037397114, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter208/308/408diesel
Control unit
Bosch EDC17CP10
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Software number
1037397114
Bosch part / software
1037500671
Software / calibration
6429027200

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter208/308/408
Enginediesel
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Software number1037397114
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyf9a20a5970b94024
Identification read from the file
ECU nameEDC17CP10
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037500671Offset in the file: 0x02001A
Software / calibration6429027200Offset in the file: 0x041D95
Bosch project identifier (EPK)46/1/EDC17CP10/1/P695//P_695_55N5__CV090600///Offset in the file: 0x0438B8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 1037397114. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
Mercedes-Benz Sprinter224/324/424/524Mercedes-Benz Sprinter224/324/424/524
1037392485Mercedes-Benz GL
1037393842Mercedes-Benz ML
1037396518Mercedes-Benz ML, Mercedes-Benz GL, Mercedes-Benz R320
1037397161Mercedes-Benz
1037500230Mercedes-Benz G, Mercedes-Benz G350, Mercedes-Benz G-Class
1037500252Mercedes-Benz ML, Mercedes-Benz ML320 2009y 3.0CDI
1037501644Mercedes-Benz Sprinter

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page