Original file

Mercedes-Benz Sprinter219/319/419/519 3.0 CDI V6 Bosch EDC17CP10 1037525401 / 1037501644

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz Sprinter219/319/419/519 3.0 CDI V6, hardware number 1037525401 and software number 1037501644, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter219/319/419/519 3.0 CDI V63.0 diesel 190.3PS / 140.0kW
Control unit
Bosch EDC17CP10
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
1037525401
Software number
1037501644
Bosch part / software
1037516313
Software / calibration
6429027200

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter219/319/419/519 3.0 CDI V6
Engine3.0 diesel 190.3PS / 140.0kW
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number1037525401
Software number1037501644
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyb859a2f06976935c
Identification read from the file
ECU nameEDC17CP10
Read typeOBD read (no boot area)
Bosch part / software1037516313Offset in the file: 0x00001A
Software / calibration6429027200Offset in the file: 0x18211A
Data set number6429037700Offset in the file: 0x182125
Bosch project identifier (EPK)46/1/EDC17CP10/1/P695//P_695_55N5__CV090600///Offset in the file: 0x188A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 1037525401 and software number 1037501644. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
02810169771037516344Mercedes-Benz Sprinter 319
02810169771037516372Mercedes-Benz Sprinter
02810169771037529284Mercedes-Benz Sprinter219 319 419 519
08480020101037500230Mercedes-Benz GL
3ZNW-165KW-EU51037503294Mercedes-Benz Vito, Mercedes-Benz VITO122, Mercedes-Benz Viano
3ZNW-165KW-EU51037512400Mercedes-Benz Vito, Mercedes-Benz VIANO 30CDI 2011 164.8KWKW
3ZNW-165KW-EU51037512483Mercedes-Benz Vito
3ZNW-165KW-EU51037516352Mercedes-Benz VITO122 V6 Turbo Diesel, Mercedes-Benz VITO122, Mercedes-Benz Viano

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page