Original file

Mercedes-Benz G Bosch EDC17CP10 1037543370

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz G, software number 1037543370, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz G3.0 diesel 211PS
Control unit
Bosch EDC17CP10
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Software number
1037543370
Software / calibration
6429029001

Technical data

Vehicle
BrandMercedes-Benz
Car modelG
Engine3.0 diesel 211PS
Power211.0PS / 155.2kW
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Software number1037543370
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key57e1b813ee12af01
Identification read from the file
ECU nameEDC17CP10
Read typeCalibration only (data set)
Bosch part / software1037543370Offset in the file: 0x18801A
Software / calibration6429029001Offset in the file: 0x1BBA0A
Data set number6429033210Offset in the file: 0x1BBA15
Bosch project identifier (EPK)45/1/EDC17CP10/1/P695//P_695_6EN5_CV130900///Offset in the file: 0x188BAC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 1037543370. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
1037510858Mercedes-Benz Benz GL Class GL350
1037525422Mercedes-Benz Benz GL X164 350CDI
1037529303Mercedes-Benz G
1037529310Mercedes-Benz G350
00544638401037396518Mercedes-Benz GL, Mercedes-Benz ML
00544694401037503294Mercedes-Benz VITO122 3.0 V6, Mercedes-Benz Sprinter219/319/419/519
00544694401037510881Mercedes-Benz Sprinter219/319/419/519
02493821601037500230Mercedes-Benz G350

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page