Original file

Mercedes-Benz Vito Bosch EDC17CP10 3ZNW-165KW-EU5 / 1037516372

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz Vito, hardware number 3ZNW-165KW-EU5 and software number 1037516372, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Vitodiesel 165KW
Control unit
Bosch EDC17CP10
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
3ZNW-165KW-EU5
Software number
1037516372
Software / calibration
6429022201

Technical data

Vehicle
BrandMercedes-Benz
Car modelVito
Enginediesel 165KW
Displacement3.0
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number3ZNW-165KW-EU5
Software number1037516372
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key6fb485a955f47e02
Identification read from the file
ECU nameEDC17CP10
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037516372Offset in the file: 0x02001A
Software / calibration6429022201Offset in the file: 0x03EE23
Data set number6429030204Offset in the file: 0x1BDDC5
Boot software6429040100Offset in the file: 0x00FC59
Bosch project identifier (EPK)45/1/EDC17CP10/1/P695//P_695_6DN6_CV112900///Offset in the file: 0x040E04

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 3ZNW-165KW-EU5 and software number 1037516372. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz VianoFlash4,096.00 KB€15Add to cart
Mercedes-Benz Sprinter219/319/419/519Flash2,048.00 KB€15Add to cart
Mercedes-Benz VianoFlash2,048.00 KB€15Add to cart
Mercedes-Benz W639FLFlash2,048.00 KB€15Add to cart
Mercedes-Benz VITO119Flash2,048.00 KB€15Add to cart
Mercedes-Benz VITO122Flash2,048.00 KB€15Add to cart
Mercedes-Benz VitoFlash2,048.00 KB€15Add to cart
Mercedes-Benz VITO122Flash2,048.00 KB€15Add to cart
Mercedes-Benz VITO122Flash2,048.00 KB€15Add to cart

All reads of 3ZNW-165KW-EU5 / 1037516372

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
3ZNW-165KW-EU51037503294Mercedes-Benz Vito, Mercedes-Benz VITO122, Mercedes-Benz Viano
3ZNW-165KW-EU51037512400Mercedes-Benz Vito, Mercedes-Benz VIANO 30CDI 2011 164.8KWKW
3ZNW-165KW-EU51037512483Mercedes-Benz Vito
3ZNW-165KW-EU51037516352Mercedes-Benz VITO122 V6 Turbo Diesel, Mercedes-Benz VITO122, Mercedes-Benz Viano
5293101037500230Mercedes-Benz G
6429010200086709Mercedes-Benz ML
64290102001037397161Mercedes-Benz E350, Mercedes-Benz ML350
64290102001037512434Mercedes-Benz E 300 CDI

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page