Original file

Mercedes-Benz ML Bosch EDC17CP10 6429010200 / 086709

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz ML, hardware number 6429010200 and software number 086709, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz ML3.0 diesel 211PS
Control unit
Bosch EDC17CP10
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6429010200
Software number
086709
Bosch part / software
10SW086709
Software / calibration
6429026204

Technical data

Vehicle
BrandMercedes-Benz
Car modelML
Engine3.0 diesel 211PS
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number6429010200
Software number086709
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7674c8c9eda2bfb6
Identification read from the file
ECU nameEDC17CP10
Read typeCalibration only (data set)
Bosch part / software10SW086709Offset in the file: 0x18A01A
Software / calibration6429026204Offset in the file: 0x1BB718
Data set number6429032620Offset in the file: 0x1BB723
Bosch project identifier (EPK)46/1/EDC17CP10/1/P695//P_695_49DC__CV183400///Offset in the file: 0x18AED0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429010200 and software number 086709. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
3ZNW-165KW-EU51037512483Mercedes-Benz Vito
3ZNW-165KW-EU51037516352Mercedes-Benz VITO122 V6 Turbo Diesel, Mercedes-Benz VITO122, Mercedes-Benz Viano
3ZNW-165KW-EU51037516372Mercedes-Benz VITO122, Mercedes-Benz Vito, Mercedes-Benz Viano
5293101037500230Mercedes-Benz G
64290102001037397161Mercedes-Benz E350, Mercedes-Benz ML350
64290102001037512434Mercedes-Benz E 300 CDI
64290102006429024403Mercedes-Benz C350 3.0d
64290102006429026204Mercedes-Benz ML300d

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page