Original file

Mercedes-Benz E350 Bosch EDC17CP10 6429010200 / 1037397161

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz E350, hardware number 6429010200 and software number 1037397161, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E3503.0 diesel · 265.0PS / 194.9kW
Control unit
Bosch EDC17CP10
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
6429010200
Software number
1037397161
Bosch part / software
10SW043178
Software / calibration
6429022000

Technical data

Vehicle
BrandMercedes-Benz
Car modelE350
Engine3.0 diesel
Power265.0PS / 194.9kW
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number6429010200
Software number1037397161
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key7d4d3e73218c03ae
Identification read from the file
ECU nameEDC17CP10
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software10SW043178Offset in the file: 0x02001A
Software / calibration6429022000Offset in the file: 0x00F010
Data set number6429031514Offset in the file: 0x1BB723
Bosch project identifier (EPK)46/1/EDC17CP10/1/P695//P_695_49DC__CV183400///Offset in the file: 0x03FE3C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429010200 and software number 1037397161. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz ML350Flash2,048.00 KB€15Add to cart

All reads of 6429010200 / 1037397161

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
3ZNW-165KW-EU51037516352Mercedes-Benz VITO122 V6 Turbo Diesel, Mercedes-Benz VITO122, Mercedes-Benz Viano
3ZNW-165KW-EU51037516372Mercedes-Benz VITO122, Mercedes-Benz Vito, Mercedes-Benz Viano
5293101037500230Mercedes-Benz G
6429010200086709Mercedes-Benz ML
64290102001037512434Mercedes-Benz E 300 CDI
64290102006429024403Mercedes-Benz C350 3.0d
64290102006429026204Mercedes-Benz ML300d
64290104001037543331Mercedes-Benz G350

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page