Original file

Mercedes-Benz E 300 CDI Bosch EDC17CP10 6429010200 / 1037512434

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz E 300 CDI, hardware number 6429010200 and software number 1037512434, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E 300 CDIdiesel 204.0PS / 150.0kW
Control unit
Bosch EDC17CP10
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6429010200
Software number
1037512434
Software / calibration
6429027700

Technical data

Vehicle
BrandMercedes-Benz
Car modelE 300 CDI
Enginediesel 204.0PS / 150.0kW
Displacement3.0
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number6429010200
Software number1037512434
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key8248b8872c5686cf
Identification read from the file
ECU nameEDC17CP10
Read typeCalibration only (data set)
Bosch part / software1037512434Offset in the file: 0x18A01A
Software / calibration6429027700Offset in the file: 0x1BBB18
Data set number6429030302Offset in the file: 0x1BBB23
Bosch project identifier (EPK)46/1/EDC17CP10/1/P695//P_695_49D1__CV094900///Offset in the file: 0x18AA10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429010200 and software number 1037512434. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
3ZNW-165KW-EU51037516372Mercedes-Benz VITO122, Mercedes-Benz Vito, Mercedes-Benz Viano
5293101037500230Mercedes-Benz G
6429010200086709Mercedes-Benz ML
64290102001037397161Mercedes-Benz E350, Mercedes-Benz ML350
64290102006429024403Mercedes-Benz C350 3.0d
64290102006429026204Mercedes-Benz ML300d
64290104001037543331Mercedes-Benz G350
64290211021037529341Mercedes-Benz E 350 CDI

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page