Original file

Mercedes-Benz C350 3.0d Bosch EDC17CP10 6429010200 / 6429024403

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz C350 3.0d, hardware number 6429010200 and software number 6429024403, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C350 3.0d3.0 diesel 231.0PS / 169.9kW
Control unit
Bosch EDC17CP10
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6429010200
Software number
6429024403
Bosch part / software
10SW043818

Technical data

Vehicle
BrandMercedes-Benz
Car modelC350 3.0d
Engine3.0 diesel 231.0PS / 169.9kW
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number6429010200
Software number6429024403
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyf32d5a4465243944
Identification read from the file
ECU nameEDC17CP10
Read typeCalibration only (data set)
Bosch part / software10SW043818Offset in the file: 0x18A01A
Software / calibration6429024403Offset in the file: 0x1BB718
Data set number6429039313Offset in the file: 0x1BB723
Bosch project identifier (EPK)46/1/EDC17CP10/1/P695//P_695_49DC__CV183400///Offset in the file: 0x18AED0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429010200 and software number 6429024403. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
5293101037500230Mercedes-Benz G
6429010200086709Mercedes-Benz ML
64290102001037397161Mercedes-Benz E350, Mercedes-Benz ML350
64290102001037512434Mercedes-Benz E 300 CDI
64290102006429026204Mercedes-Benz ML300d
64290104001037543331Mercedes-Benz G350
64290211021037529341Mercedes-Benz E 350 CDI
64290220001037397161Mercedes-Benz E300 CDI, Mercedes-Benz C300 3.0d, Mercedes-Benz ML 300 CDI

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page