Original file
Mercedes-Benz ML300d Bosch EDC17CP10 6429010200 / 6429026204
An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz ML300d, hardware number 6429010200 and software number 6429026204, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz ML300dOM642 · 204.0PS / 150.0kW
- Control unit
- Bosch EDC17CP10
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- 6429010200
- Software number
- 6429026204
- Bosch part / software
- 10SW086708
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | ML300d |
| Engine | OM642 |
| Fuel | Diesel |
| Displacement | 3.0 |
| Power | 204.0PS / 150.0kW |
| Control unit | Bosch EDC17CP10 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 6429010200 |
| Software number | 6429026204 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | a506750c4bdb7967 |
| ECU name | EDC17CP10 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW086708 | Offset in the file: 0x18A01A |
| Software / calibration | 6429026204 | Offset in the file: 0x1BB718 |
| Data set number | 6429032520 | Offset in the file: 0x1BB723 |
| Bosch project identifier (EPK) | 46/1/EDC17CP10/1/P695//P_695_49DC__CV183400/// | Offset in the file: 0x18AED0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 6429010200 and software number 6429026204. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP10
| Hardware | Software | Vehicles |
|---|---|---|
| 6429010200 | 086709 | Mercedes-Benz ML |
| 6429010200 | 1037397161 | Mercedes-Benz E350, Mercedes-Benz ML350 |
| 6429010200 | 1037512434 | Mercedes-Benz E 300 CDI |
| 6429010200 | 6429024403 | Mercedes-Benz C350 3.0d |
| 6429010400 | 1037543331 | Mercedes-Benz G350 |
| 6429021102 | 1037529341 | Mercedes-Benz E 350 CDI |
| 6429022000 | 1037397161 | Mercedes-Benz E300 CDI, Mercedes-Benz C300 3.0d, Mercedes-Benz ML 300 CDI |
| 6429022404 | 10SW094209 P6956KN3 | Mercedes-Benz Viano 3.0 CDI |