Original file

Mercedes-Benz G350 Bosch EDC17CP10 6429010400 / 1037543331

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz G350, hardware number 6429010400 and software number 1037543331, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz G3503.0 211PS
Control unit
Bosch EDC17CP10
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6429010400
Software number
1037543331
Software / calibration
6429029001

Technical data

Vehicle
BrandMercedes-Benz
Car modelG350
Engine3.0 211PS
FuelDiesel
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number6429010400
Software number1037543331
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2868cb0acd3346cf
Identification read from the file
ECU nameEDC17CP10
Read typeCalibration only (data set)
Bosch part / software1037543331Offset in the file: 0x18801A
Software / calibration6429029001Offset in the file: 0x1BBA0A
Data set number6429031908Offset in the file: 0x1BBA15
Bosch project identifier (EPK)45/1/EDC17CP10/1/P695//P_695_6EN5_CV130900///Offset in the file: 0x188BAC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429010400 and software number 1037543331. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
64290102001037397161Mercedes-Benz E350, Mercedes-Benz ML350
64290102001037512434Mercedes-Benz E 300 CDI
64290102006429024403Mercedes-Benz C350 3.0d
64290102006429026204Mercedes-Benz ML300d
64290211021037529341Mercedes-Benz E 350 CDI
64290220001037397161Mercedes-Benz E300 CDI, Mercedes-Benz C300 3.0d, Mercedes-Benz ML 300 CDI
642902240410SW094209 P6956KN3Mercedes-Benz Viano 3.0 CDI
64290236011037500231Mercedes-Benz Sprinter 319 CDI

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page