Original file

Mercedes-Benz E 350 CDI Bosch EDC17CP10 6429021102 / 1037529341

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz E 350 CDI, hardware number 6429021102 and software number 1037529341, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E 350 CDIdiesel 211.0PS / 155.2kW
Control unit
Bosch EDC17CP10
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6429021102
Software number
1037529341

Technical data

Vehicle
BrandMercedes-Benz
Car modelE 350 CDI
Enginediesel 211.0PS / 155.2kW
Displacement3.0
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number6429021102
Software number1037529341
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyf4d7e259653afe09
Identification read from the file
ECU nameEDC17CP10
Read typeCalibration only (data set)
Bosch part / software1037529341Offset in the file: 0x18801A
Software / calibration6429021102Offset in the file: 0x1BA286
Data set number6429037506Offset in the file: 0x1BA291
Bosch project identifier (EPK)45/1/EDC17CP10/1/P695//P_695_6LN1_CV134600///Offset in the file: 0x188BAC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429021102 and software number 1037529341. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
64290102001037512434Mercedes-Benz E 300 CDI
64290102006429024403Mercedes-Benz C350 3.0d
64290102006429026204Mercedes-Benz ML300d
64290104001037543331Mercedes-Benz G350
64290220001037397161Mercedes-Benz E300 CDI, Mercedes-Benz C300 3.0d, Mercedes-Benz ML 300 CDI
642902240410SW094209 P6956KN3Mercedes-Benz Viano 3.0 CDI
64290236011037500231Mercedes-Benz Sprinter 319 CDI
64290236011037503294Mercedes-Benz Sprinter 319 CDI

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page