Original file

Mercedes-Benz Viano 3.0 CDI Bosch EDC17CP10 6429022404 / 10SW094209 P6956KN3

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz Viano 3.0 CDI, hardware number 6429022404 and software number 10SW094209 P6956KN3, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Viano 3.0 CDI3.0 diesel 224.0PS / 164.8kW
Control unit
Bosch EDC17CP10
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6429022404
Software number
10SW094209 P6956KN3
Bosch part / software
10SW094209

Technical data

Vehicle
BrandMercedes-Benz
Car modelViano 3.0 CDI
Engine3.0 diesel 224.0PS / 164.8kW
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number6429022404
Software number10SW094209 P6956KN3
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key055b751f77df1f65
Identification read from the file
ECU nameEDC17CP10
Read typeCalibration only (data set)
Bosch part / software10SW094209Offset in the file: 0x18801A
Software / calibration6429022404Offset in the file: 0x1BD1A6
Data set number6429036419Offset in the file: 0x1BD1B1
Bosch project identifier (EPK)45/1/EDC17CP10/1/P695//P_695_6KN3_CV215000///Offset in the file: 0x18906C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429022404 and software number 10SW094209 P6956KN3. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
64290102006429026204Mercedes-Benz ML300d
64290104001037543331Mercedes-Benz G350
64290211021037529341Mercedes-Benz E 350 CDI
64290220001037397161Mercedes-Benz E300 CDI, Mercedes-Benz C300 3.0d, Mercedes-Benz ML 300 CDI
64290236011037500231Mercedes-Benz Sprinter 319 CDI
64290236011037503294Mercedes-Benz Sprinter 319 CDI
64290236011037525401Mercedes-Benz Sprinter 319 CDI
64290244031037397161Mercedes-Benz C 300 CDI, Mercedes-Benz E300 CDI 3.0d

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page