Original file

Mercedes-Benz E 350 CDI Bosch EDC17CP10 6429024403 / 10SW043840 P69549DC

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz E 350 CDI, hardware number 6429024403 and software number 10SW043840 P69549DC, 12,288.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E 350 CDIdiesel 231PS
Control unit
Bosch EDC17CP10
Read type
Calibration only (data set)
File
12,288.00 KB · Flash
Hardware number
6429024403
Software number
10SW043840 P69549DC
Bosch part / software
10SW043840

Technical data

Vehicle
BrandMercedes-Benz
Car modelE 350 CDI
Enginediesel 231PS
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number6429024403
Software number10SW043840 P69549DC
File
File typeOriginal flash read
File size12,288.00 KB (12,582,912 bytes)
File key181503d81487c087
Identification read from the file
ECU nameEDC17CP10
Read typeCalibration only (data set)
Bosch part / software10SW043840Offset in the file: 0x18A01A
Software / calibration6429024403Offset in the file: 0x1BB718
Data set number6429030114Offset in the file: 0x1BB723
Bosch project identifier (EPK)46/1/EDC17CP10/1/P695//P_695_49DC__CV183400///Offset in the file: 0x18AED0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429024403 and software number 10SW043840 P69549DC. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
64290236011037503294Mercedes-Benz Sprinter 319 CDI
64290236011037525401Mercedes-Benz Sprinter 319 CDI
64290244031037397161Mercedes-Benz C 300 CDI, Mercedes-Benz E300 CDI 3.0d
642902440310SW043837 P69549DCMercedes-Benz E 350 CDI
64290268001037500230Mercedes-Benz ML 350 CDI (3.0), Mercedes-Benz GL 350 CDI
64290272001037501644Mercedes-Benz Sprinter 319 CDI
64290276011037503294Mercedes-Benz Sprinter 319 CDI
64290276011037529286Mercedes-Benz Sprinter 319 CDI

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page