Original file

Mercedes-Benz GL 350 CDI Bosch EDC17CP10 6429026800 / 1037500230

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz GL 350 CDI, hardware number 6429026800 and software number 1037500230, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GL 350 CDIdiesel 211.0PS / 155.2kW
Control unit
Bosch EDC17CP10
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
6429026800
Software number
1037500230
Bosch part / software
1037516301

Technical data

Vehicle
BrandMercedes-Benz
Car modelGL 350 CDI
Enginediesel 211.0PS / 155.2kW
Displacement3.0
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number6429026800
Software number1037500230
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key929a5030b285b43c
Identification read from the file
ECU nameEDC17CP10
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037516301Offset in the file: 0x02001A
Software / calibration6429026800Offset in the file: 0x00FC59
Data set number6429032203Offset in the file: 0x181D35
Bosch project identifier (EPK)45/1/EDC17CP10/1/P695//P_695_6HN0_CV105100///Offset in the file: 0x042A00

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429026800 and software number 1037500230. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz ML 350 CDI (3.0)Flash4,096.00 KB€15Add to cart

All reads of 6429026800 / 1037500230

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
64290236011037525401Mercedes-Benz Sprinter 319 CDI
64290244031037397161Mercedes-Benz C 300 CDI, Mercedes-Benz E300 CDI 3.0d
642902440310SW043837 P69549DCMercedes-Benz E 350 CDI
642902440310SW043840 P69549DCMercedes-Benz E 350 CDI
64290272001037501644Mercedes-Benz Sprinter 319 CDI
64290276011037503294Mercedes-Benz Sprinter 319 CDI
64290276011037529286Mercedes-Benz Sprinter 319 CDI
64290277001037397161Mercedes-Benz C 300 CDI, Mercedes-Benz C 350 CDI, Mercedes-Benz E 350 CDI

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page