Original file

Mercedes-Benz Sprinter 319 CDI Bosch EDC17CP10 6429027601 / 1037529286

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz Sprinter 319 CDI, hardware number 6429027601 and software number 1037529286, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter 319 CDIdiesel 190.0PS / 139.7KW
Control unit
Bosch EDC17CP10
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
6429027601
Software number
1037529286

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter 319 CDI
Enginediesel 190.0PS / 139.7KW
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number6429027601
Software number1037529286
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyd6c8dfda0c3fe798
Identification read from the file
ECU nameEDC17CP10
Read typeCalibration only (data set)
Bosch part / software1037529286Offset in the file: 0x18801A
Software / calibration6429027601Offset in the file: 0x18301E
Data set number6429034504Offset in the file: 0x183029
Bosch project identifier (EPK)45/1/EDC17CP10/1/P695//P_695_6KN0_CV121400///Offset in the file: 0x188BAC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429027601 and software number 1037529286. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
642902440310SW043840 P69549DCMercedes-Benz E 350 CDI
64290268001037500230Mercedes-Benz ML 350 CDI (3.0), Mercedes-Benz GL 350 CDI
64290272001037501644Mercedes-Benz Sprinter 319 CDI
64290276011037503294Mercedes-Benz Sprinter 319 CDI
64290277001037397161Mercedes-Benz C 300 CDI, Mercedes-Benz C 350 CDI, Mercedes-Benz E 350 CDI
64290277001037512429Mercedes-Benz E 350 CDI
64290282001037505825Mercedes-Benz E 320 CDI
64290290001037503294Mercedes-Benz Vito 122 CDI

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page