Original file

Mercedes-Benz E 350 CDI Bosch EDC17CP10 6429027700 / 1037397161

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz E 350 CDI, hardware number 6429027700 and software number 1037397161, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E 350 CDIdiesel 231.0PS / 169.9kW
Control unit
Bosch EDC17CP10
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
6429027700
Software number
1037397161
Bosch part / software
1037505845
Software / calibration
6429022000

Technical data

Vehicle
BrandMercedes-Benz
Car modelE 350 CDI
Enginediesel 231.0PS / 169.9kW
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number6429027700
Software number1037397161
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keybd8b3297da47c3df
Identification read from the file
ECU nameEDC17CP10
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037505845Offset in the file: 0x02001A
Software / calibration6429022000Offset in the file: 0x00F010
Data set number6429030402Offset in the file: 0x1BBB23
Bosch project identifier (EPK)46/1/EDC17CP10/1/P695//P_695_49D1__CV094900///Offset in the file: 0x03FE3C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429027700 and software number 1037397161. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz C 350 CDIFlash4,096.00 KB€15Add to cart
Mercedes-Benz C 300 CDIFlash8,192.00 KB€15Add to cart

All reads of 6429027700 / 1037397161

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
64290268001037500230Mercedes-Benz ML 350 CDI (3.0), Mercedes-Benz GL 350 CDI
64290272001037501644Mercedes-Benz Sprinter 319 CDI
64290276011037503294Mercedes-Benz Sprinter 319 CDI
64290276011037529286Mercedes-Benz Sprinter 319 CDI
64290277001037512429Mercedes-Benz E 350 CDI
64290282001037505825Mercedes-Benz E 320 CDI
64290290001037503294Mercedes-Benz Vito 122 CDI
64290290001037510881Mercedes-Benz Sprinter 319 CDI

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page