Original file

Mercedes-Benz Vito 122 CDI Bosch EDC17CP10 6429040100 / 1037503294

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz Vito 122 CDI, hardware number 6429040100 and software number 1037503294, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Vito 122 CDIdiesel 224.0PS / 164.8kW
Control unit
Bosch EDC17CP10
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
6429040100
Software number
1037503294
Bosch part / software
1037516372
Software / calibration
6429022201

Technical data

Vehicle
BrandMercedes-Benz
Car modelVito 122 CDI
Enginediesel 224.0PS / 164.8kW
Displacement3.0
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number6429040100
Software number1037503294
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key01bfedf7f078662b
Identification read from the file
ECU nameEDC17CP10
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037516372Offset in the file: 0x02001A
Software / calibration6429022201Offset in the file: 0x03EE23
Data set number6429030204Offset in the file: 0x1BDDC5
Boot software6429040100Offset in the file: 0x00FC59
Bosch project identifier (EPK)45/1/EDC17CP10/1/P695//P_695_6DN6_CV112900///Offset in the file: 0x040E04

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429040100 and software number 1037503294. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz Vito 122Flash2,048.00 KB€15Add to cart

All reads of 6429040100 / 1037503294

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
64290290001037510881Mercedes-Benz Sprinter 319 CDI
64290290011037500230Mercedes-Benz G 350 CDI
64290317081037543330Mercedes-Benz G 350 CDI
64290379061037500230Mercedes-Benz ML 300 CDI
A64290104001037500230Mercedes-Benz R
CR6Bin5-642-61N4-164WA-155kW-BIN5-ME4_V21037500230Mercedes-Benz ML350
CR6Bin5-642-61N4-164XA-155kW-BIN5-ME4_V21037500230Mercedes-Benz ML
CR6Bin5-642-61N7-212WA-155kW-EU6-my11_v31037510876Mercedes-Benz E350 CDI

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page