Original file

Mercedes-Benz ML Bosch EDC17CP10 CR6Bin5-642-61N4-164XA-155kW-BIN5-ME4_V2 / 1037500230

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz ML, hardware number CR6Bin5-642-61N4-164XA-155kW-BIN5-ME4_V2 and software number 1037500230, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz ML3.0 diesel 210PS
Control unit
Bosch EDC17CP10
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
CR6Bin5-642-61N4-164XA-155kW-BIN5-ME4_V2
Software number
1037500230
Bosch part / software
1037503245
Software / calibration
6429026800

Technical data

Vehicle
BrandMercedes-Benz
Car modelML
Engine3.0 diesel 210PS
Power210.0PS / 154.5kW
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware numberCR6Bin5-642-61N4-164XA-155kW-BIN5-ME4_V2
Software number1037500230
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key36e52b53275904b7
Identification read from the file
ECU nameEDC17CP10
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037503245Offset in the file: 0x02001A
Software / calibration6429026800Offset in the file: 0x00FC59
Data set number6429037500Offset in the file: 0x181C61
Bosch project identifier (EPK)45/1/EDC17CP10/1/P695//P_695_61N4_CV093200///Offset in the file: 0x040EDC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR6Bin5-642-61N4-164XA-155kW-BIN5-ME4_V2 and software number 1037500230. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz MLFlash2,048.00 KB€15Add to cart

All reads of CR6Bin5-642-61N4-164XA-155kW-BIN5-ME4_V2 / 1037500230

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
64290379061037500230Mercedes-Benz ML 300 CDI
64290401001037503294Mercedes-Benz Vito 122, Mercedes-Benz Vito 122 CDI
A64290104001037500230Mercedes-Benz R
CR6Bin5-642-61N4-164WA-155kW-BIN5-ME4_V21037500230Mercedes-Benz ML350
CR6Bin5-642-61N7-212WA-155kW-EU6-my11_v31037510876Mercedes-Benz E350 CDI
CR6Bin5-642-61N8-164WA-155kW-BIN5-my11_v31037500230Mercedes-Benz ML, Mercedes-Benz Sprinter
CR6Bin5-642-61N8-164WA-155kW-BIN5-my11_v31037510873Mercedes-Benz ML
CR6Bin5-642-61N8-164XA-155kW-BIN5-my11_v31037510873Mercedes-Benz Gl, Mercedes-Benz GL350

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page