Original file
Mercedes-Benz E350 CDI Bosch EDC17CP10 CR6Bin5-642-61N7-212WA-155kW-EU6-my11_v3 / 1037510876
An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz E350 CDI, hardware number CR6Bin5-642-61N7-212WA-155kW-EU6-my11_v3 and software number 1037510876, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz E350 CDI3.0 diesel 210PS
- Control unit
- Bosch EDC17CP10
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- CR6Bin5-642-61N7-212WA-155kW-EU6-my11_v3
- Software number
- 1037510876
- Software / calibration
- 6429023600
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | E350 CDI |
| Engine | 3.0 diesel 210PS |
| Power | 210.0PS / 154.5kW |
| Control unit | Bosch EDC17CP10 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR6Bin5-642-61N7-212WA-155kW-EU6-my11_v3 |
| Software number | 1037510876 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 55c7c3c4aaed6e39 |
| ECU name | EDC17CP10 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 1037510876 | Offset in the file: 0x18801A |
| Software / calibration | 6429023600 | Offset in the file: 0x1BDCAA |
| Data set number | 6429038501 | Offset in the file: 0x1BDCB5 |
| Bosch project identifier (EPK) | 45/1/EDC17CP10/1/P695//P_695_61N7_CV100800/// | Offset in the file: 0x188BAC |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR6Bin5-642-61N7-212WA-155kW-EU6-my11_v3 and software number 1037510876. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP10
| Hardware | Software | Vehicles |
|---|---|---|
| 6429040100 | 1037503294 | Mercedes-Benz Vito 122, Mercedes-Benz Vito 122 CDI |
| A6429010400 | 1037500230 | Mercedes-Benz R |
| CR6Bin5-642-61N4-164WA-155kW-BIN5-ME4_V2 | 1037500230 | Mercedes-Benz ML350 |
| CR6Bin5-642-61N4-164XA-155kW-BIN5-ME4_V2 | 1037500230 | Mercedes-Benz ML |
| CR6Bin5-642-61N8-164WA-155kW-BIN5-my11_v3 | 1037500230 | Mercedes-Benz ML, Mercedes-Benz Sprinter |
| CR6Bin5-642-61N8-164WA-155kW-BIN5-my11_v3 | 1037510873 | Mercedes-Benz ML |
| CR6Bin5-642-61N8-164XA-155kW-BIN5-my11_v3 | 1037510873 | Mercedes-Benz Gl, Mercedes-Benz GL350 |
| CR6Bin5-642-61N8-164XA-155kW-EU6-my11_v3 | 1037510875 | Mercedes-Benz GL |